It's a good idea to put a brightly colored tag or ribbon on the valve when you do this as a visual reminder to you or anyone else who passes by that the valve needs to be turned back on later.The Control Valve Any discussion on fire sprinkler system maintenance needs to touch on the control valve. When this is the case, be sure water is only shut off to the one area where the work is being done and only for as long as completely necessary. Systems that aren't properly maintained may not work as they're supposed to and that could end up costing you the ultimate price. It's also not a bad idea to tell your insurance company. It's an essential part of any fire sprinkler system, and also an easy one to inspect.Inspecting Sprinklers When you want to inspect the actual sprinklers, you need to turn off the valve, as we just mentioned.
Depending on your municipality, you may need a certified contractor to handle your inspections and testing for you. If this valve is off, your sprinklers will get no water and be useless in the case of a fire.Also, alert the local authorities that you're conducting fire sprinkler system maintenance.Also, sometimes the valve needs to be shut off to conduct maintenance or handle repairs on your system. It's not like they all run on a single activation system and if one shock absorber isn't working correctly, the others will just pick up the slack. Sometimes this is mandatory if it means keeping yourself covered by conducting regular fire sprinkler system maintenance. So a fire could actually only activate one or two heads, which then work to contain the flames until the authorities make it to the scene.Why is this important? We'll elaborate shortly, but the takeaway is that each head needs its own maintenance. Each sprinkler head is designed to only go off when the area around it is hot enough to melt the fusible link blocking the flow of water. However, this will only happen if you've been practicing sound fire sprinkler system maintenance.
You can rest easy knowing that, should a fire break out, your system will immediately react to keep everyone safe by containing the outbreak until the fire department arrives. You also want to make sure that you keep any ignition sources out of the area for the duration of the inspection. Your alarm company should know too in case you need to set yours off for a drill or as part of repairs.That's not how it actually works though. Essentially, there's a valve in your building that must remain open in order for the water supply to flow.safety inspection Fire system maintenance If your building is outfitted with a sprinkler system, you're right to feel a bit safer..How Sprinklers WorkFirst, however, let's take a quick look at how your fire sprinklers actually work.Like we already said, keep your inspection to only as many sprinklers as necessary and allow the rest to operate as normal. Just take a look once a week to ensure it's still locked in the open position.The good news is that checking the valve is probably the easiest component of fire sprinkler system maintenance.
There's no reason to take unnecessary risks. Unfortunately, closed valves are the leading cause of widespread fire damage.In terms of how often you should conduct maintenance on your sprinklers, check NFPA 25: Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems. In the movies, at the first hint of fire, every sprinkler on the building's floor goes off, covering the entire area in water. So let's take a look at what goes into fire sprinkler system maintenance and then take action to ensure you're doing what's necessary