Single row angular contact ball bearing for air compressor Mainly used as thrust bearings, single or tandem installation (in a tandem arrangement, they can bear high thrust loads), suitable for the situation where there are both radial load and high axial load in one direction, for use in conveying Ammonia medium pumps will also use FP cages (pumps).
Deep groove ball bearing for air compressor Mainly used for floating-end bearings, rarely used as fixed-end bearings, suitable for high-speed operation, and can provide a sealed design.Air compressor single row cylindrical roller bearings N, NJ, NU, and NUP can also be used with full complement or double row cylindrical roller bearings. The contact angle of bearings with the 'B' suffix is 40°.
It is suitable for radial load and high thrust load in one direction, and also suitable for ammonia pump with FP cage. Air compressor tapered roller bearings It has high axial and radial bearing capacity, and the bearing has precise radial guiding ability due to small axial clearance. Long-life lubrication is also possible, that is, no relubrication is required.
Such bearings can withstand higher axial loads (pumps), or they can be sealed Bearing. Since the inner ring of the four-point contact ball bearing is a split design, this design enables it to accommodate more rolling elements, thereby improving the radial load carrying capacity of the bearing.
https://www.nmrbearing.com/pro....duct/mechanical-ball
