aerator jinhu

4 Jahre - übersetzen

To master the correct method of use, in addition to the above-mentioned measures to select the best start-up time, it must also be used flexibly depending on the location, season, and weather. Before installation: Before installation, determine the installation position of the aerator, and prepare the piles and ropes.In addition to directly supplying oxygen to the water to meet the needs, the most important thing is to store a large amount of oxygen to ensure night needs.

Clean up all weeds and other entangled items within the scope of the pile.5-1 meters away from the water surface. At the same time, the water directly passes through the motor and the reducer when it erupts upwards, so that the motor and the reducer can work for a long time without heating under the cooling of the water, which eliminates the common problems of heating, current increase, and burnout caused by the motor for a long time. However, many fish farms and users lack scientificity in using pond aerators, which will directly affect the use of aerators. This is the best time for light throughout the day.

At this time, the metabolism of the fish is strong, and the oxygen consumption increases. . And can operate normally under the ultra-low voltage of 300-350 watts. The wiring part must not be submerged in the water to prevent electric shock caused by water leakage in the wire joints. The aeration surge aerator is the latest product in aquaculture aeration equipment at present, and the biggest advantage of its design is power saving. It is better to be 10-15 cm from the water surface.

Turn on before dawn At this time, the air pressure is low, fish and various animals and plants have consumed oxygen overnight, and the dissolved oxygen in the pool can be quickly restored to more than 4 milligrams after turning on for 1-2 hours. The principle of aeration is different from the impeller type and the waterwheel type. Line connection The lead wire of the motor is connected to the cable and bound with waterproof tape.

https://www.chinaaerator.net/p....roduct/multi-impelle

5 Jahre - übersetzen

The aerators of the blast system are mainly divided into micro bubbles, medium bubbles, large bubbles, hydraulic shear, hydraulic shock, and air lift. Aquatic aerator tells that in the aerobic treatment process of wastewater, the aeration system is the main component, and the selection of the appropriate aeration system can play a decisive role in the effect of wastewater treatment. Aeration types are roughly divided into two categories: one is blast aeration, and the other is mechanical aeration. Underwater aerators mainly include microporous aerators and jet aerators.

This process produces oxygen transfer to the sewage. Based on excellent product quality and timely after-sales service. The tubular microporous aerator has the characteristics of low resistance, less piping, large aeration, high efficiency and diversified installation methods, and has been widely used. According to the method of use, it can be divided into surface aerator and underwater aerator.

Maintain a sufficient speed of the liquid to make the biological solids in the water suspended. The size depends on the form of the air diffusion device. Aerators are necessary equipment for aeration and oxygenation of water supply and drainage.

Generally, sewage treatment uses this method. One air inlet is connected to the blower, and multiple outlets inject air into the water to produce an effect. Underwater aerators mainly include microporous aerators and jet aerators. According to the method of use, they can be divided into surface aerators and underwater aerators.

The bubbles rise and flow with the water, and then burst at the liquid level. Aeration is a means to make air and water come into strong contact. The purpose of aquatic aerators is to dissolve the oxygen in the air in the water. 1. The blower conveys the air through a series of pipes to the aerator installed at the bottom of the pool, and through the aerator, the air forms bubbles of different sizes.

https://www.chinaaerator.net/p....roduct/paddle-wheel-

5 Jahre - übersetzen

Taizhou Jinhu Mechanical & Electrical Co. LTD

Taizhou Jinhu Mechanical & Electrical Co. LTD is located in Huangyan District, Taizhou, Zhejiang, the cradle of private enterprises in China and a city famous for its agricultural and aquacultural machinery industry. The company covers an area of 48,000 square meters and owns over 20 sets of advanced processing machines, mainly from Japan and Germany. We have the capacity of producing over 200,000 sets of agricultural and aquacultural machines every year.

As a professional manufacturer in this industry, we have the integrated ability of research and development, manufacturing, and sales. We have got the certification of ISO9001: 2008, with many products awarded CE certification, utility model design, and patent for the invention. We are admitted into the list of enterprises enjoying national promotion and national subsidies in 2010, and also have the self-supported import & export rights. The Jinhulong series of products sell well around China and are also exported to East-south Asia, Middle East, Europe, and other regions, enjoying a good reputation and fame among our clients.

https://www.chinaaerator.net/

hat ihr Profilbild geändert